The MIC2299 is a high power boost-switching regulator that is optimized for constant-current control. The MIC2299 is capable of driving up to two series 1A white LED for photoflash and other applications. The feedback voltage is only 200mV, minimizing power dissipation in constant-current control applications, and hence extends battery life.

The MIC2299 has a brightness pin that allows for a programmable torch mode as well as full flash with a single pin when driving high current LEDs.

The MIC2299 implements a constant frequency 2MHz PWM control scheme to make the smallest possible design. The MIC2299's 2MHz operation avoids signal interference in the AM band.

The 2.5V to 10V input voltage range of MIC2299 allows direct operation from 1- and 2-cell Li-Ion as well as 3- to 4-cell NiCad/ NiMH/ Alkaline or lithium batteries . Maximum battery life is assured with a low 1µA shutdown current.

The MIC2299 is available in a low profile 12-pin 3mm x 3mm MLF® package.

  Programmable current control

  200mV ±10% feedback voltage

  2.5V to 10V input voltage

  Output over voltage protection (OVP)

  Output voltage up to 30V (max)

  Fixed 2.0MHz Operation

  Guaranteed 3.5A switch current over-temperature

  Solution size of just 0.25in² (1.6cm²)

  Output power range of 7W to 12W

  <1% line regulation

  1µA shutdown current

  Over temperature protection

  Externally programmable soft-start

  Under-voltage lockout (UVLO)

  12-pin 3mm x 3mm leadless MLF® package

  -40°C to +125°C junction temperature range