The TC7660 is a pin-compatible replacement for the Industry standard TC7660 charge pump voltage converter. It converts a +1.5V to +10V input to a corresponding – 1.5V to -10V output using only two low-cost capacitors,eliminating inductors and their associated cost,size and EMI. The on-board oscillator operates at a nominal frequency of 10kHz.Operation below 10kHz (for lower supply current applications)is possible by connecting an external capacitor from OSC to ground (with pin 1 open). The TC7660 is available in both 8-pin DIP and 8-pin SOIC packages in commercial and extended temperature ranges.

  Converts +5V Logic Supply to ±5V System

  Efficient Voltage Conversion: 99.9%

  Excellent Power Efficiency: 98%

  Low Power Supply: 80µA @ 5VIN

  Low Cost and Easy to Use — Only Two External Capacitors Required

  RS232 Negative Power Supply

  Improved ESD Protection: Up to 3kV

  No Dx Diode Required for High Voltage Operation