IMPORTANT NOTICE:This product is available as a reference design.All documentation and specifications are available so you can build your own tag.

()The RN-T7-TAG is a small, battery-powered wireless device that uses a standard 802.11 b/g Wi-Fi network to track assets using customer-developed or third-party location engines.Based on the ultra-low power RN171 Wi-Fi module (built with silicon specifically designed for asset tracking type applications), the tag consumes very little power - waking up from 4µA deep sleep, drawing only 35 mA (on average) while awake and connected over Wi-Fi, sending data and going back to sleep in only 100ms – giving it multi-year battery life.Custom WebScan firmware running on the module adds RTLS capability and is designed specifically to address the key requirements in asset tracking implementations, cost and simplicity.The tag’s low-power hardware and specialized WebScan firmware coupled with a range of sensors such as motion sensor, on-board temperature sensor, pushbuttons, and a Reed switch make the RN-T7-TAG ideal for building RTLS systems or as a reference design.

  Based on the ultra-low power RN171 module (4 µA sleep)

  Can wake and send RSSI UDP packets in 100 ms

  Configurable transmit power 0 to +12 dBm

  Full 802.11b/g Wi-Fi transmit and receive functions

  Built-in three-axis motion sensor and contact closure Reed relay switch

  Built in thermistor for temperature sensing

  Three general-purpose pushbuttons

  On-board sensor eliminates the need for an external microprocessor

  Two bi-color LEDs to indicate status

  Powered with a CR-123 replaceable battery

  Contains a built-in battery boost circuit

  Waterproof/dustproof ABS polycarbonate housing (IP67 casing) with slots for straps allowing the tag to be connected to personnel and equipment

  Works with the Cisco CCX engine; can perform a Cisco CCX blink in 15 ms