The MIC2130/1 is a high voltage input PWM synchronous buck IC. It is a voltage mode controller with a fast hysteretic control loop (FHyCL) employed during fast line and load transients. The internal gate drivers are designed to drive high current MOSFETs.

The MIC2130/1 can produce output voltages down to 0.7V with input voltage from 8V to 40V. The MIC2130 family of control ICs implements fixed frequency PWM control. The active anti-shoot through drive scheme means a wide range of external MOSFETs may be used while maintaining optimum efficiency.

The MIC2131 is the fully functional version of the family and implements a new feature to minimize EMI. This function is critical for systems that need to be compliant with EMI standards throughout the world.

The MIC2130/1 is available in small size 16-pin 4mm x 4mm MLF® package, as well as 16-pin e-TSSOP at a junction temperature range of -40°C to +125°C.

  8V to 40V input voltage range

  Adjustable output voltages down to 0.7V

  Low EMI option (MIC2131)

  Fixed 150kHz and 400kHz frequency options

  Excellent line and load regulation due to fast hysteretic control loop during transients

  Adaptive gate drive allows efficiencies over 95%

  Programmable current limit with no sense resistor

  Senses low-side MOSFET current

  Internal drivers allow 15A output current

  Power Good output allow simple sequencing

  Programmable soft-start pin

  100% increase in current limit (MIC2131)

  Output over-voltage protection

  Programmable Input UVLO

  16-pin e-TSSOP and 16-pin 4mm x 4mm MLF®

  Junction temperature range of -40°C to +125°C