The MCP14A0601/2 devices are high-speed MOSFET drivers that are capable of providing up to 6.0A of peak current while operating from a single 4.5V to 18V supply. There are two output configurations available; inverting (MCP14A0601) and noninverting (MCP14A0602). These devices feature low shoot-through current, fast rise and fall times, and matched propagation delays which make them ideal for high switching frequency applications.

The MCP14A0601/2 family of devices offers enhanced control with Enable functionality. The active-high Enable pin can be driven low to drive the output of the MCP14A0601/2 low, regardless of the status of the Input pin. An integrated pull-up resistor allows the user to leave the Enable pin floating for standard operation.
These devices are highly latch-up resistant under any condition within their power and voltage ratings. They can accept up to 500 mA of reverse current being forced back into their outputs without damage or logic upset. All terminals are fully protected against electrostatic discharge (ESD) up to 2 kV (HBM) and 200V (MM).

  High Peak Output Current: 6.0A (typical)

  Wide Input Supply Voltage Operating Range:-4.5V to 18V

  Low Shoot-Through/Cross-Conduction Current in Output Stage

  High Capacitive Load Drive Capability:-2500 pF in 10 ns (typical)

  Short Delay Times: 22 ns (tD1), 22 ns (tD2) (typical)

  Low Supply Current: 375 μA (typical)

  Low-Voltage Threshold Input and Enable with Hysteresis Latch-Up Protected: Withstands 500 mA Reverse Current

  Space-Saving Packages:

  8-Lead MSOP

  8-Lead SOIC

  8-Lead 2 x 3 TDFN