购物车0制造商:ON
The LV8907 is a high performance, sensor-less three-phase BLDC motor controller with integrated gate drivers for driving external N-MOSFETs. An on-chip two-stage charge pump provides required gate current for a wide range of ultra low RDS(ON) type external N-MOSFETs. The device offers a rich set of system protection and diagnostic functions such as over-current, over-voltage, short-circuit, under-voltage, over-temperature and many more. It supports open-loop as well as closed-loop speed control with user configurable startup, speed setting and proportional/integral (PI) control coefficients, making it suitable for a wide range of motor and load combinations. With an in-built linear regulator for powering an external circuit, a watchdog timer and a Local Interconnect Network (LIN) transceiver, the LV8907 offers the smallest system solution footprint. An SPI interface is provided for parameter setting and monitoring the system health. With the operating junction temperature tolerance up to 175°C and electrically LIN compatible control signals (PWM and Enable), the LV8907 is an ideal solution stand-alone automotive BLDC motor control systems.
Operating junction temperature up to 175°C
Operating voltage range from 5.5 V to 20 V with tolerance from 4.5 V to 40 V
Embedded proprietary sensor-less commutation control
In-built LIN transciever and Watchdog timer
SPI interface for real-time parameterization and diagnostic
Various system protection features including
Shoot through protection using configurable dead-time
Drain-source short detection
Cycle-by-cycle current limit and over-current shutdown
Over-voltage and under-voltage shutdown
Over-temperature warning and shutdown
Input PWM fault detection
Integrated 5 V/3.3 V regulator output for external circuit
Integrated gate drivers for driving six N-MOSFETs
Two-stage charge pump for continuous 100% duty-cycle operation
Supports open-loop as well as closed-loop speed control
Configurable speed setting and PI control coefficients



LV8907UW 引脚图

LV8907UW 引脚图

LV8907UW电路图

LV8907UW 封装图
| 型号 | 制造商 | 描述 | 购买 |
|---|---|---|---|
| LV8907UWR2G | ON | LV8907 是一款高性能、无传感器三相 BLDC 电机控制器,带有集成的门极驱动器,用于驱动外部 N-MOSFET。片上两级电荷泵提供了所需的门极电流,适用于多种超低 RDS(ON) 型外部 N-MOSFET。该器件提供了多种系统保护和诊断功能,如过电流、过电压、短路、欠电压、高温等。它支持开环以及闭环速度控制,带有用户可配置启动、速度设置和比例/积分 (PI) 控制系数,因此适用于多种电机和负载组合。LV8907 具有内置的线性稳压器用于为外部电路、监控计时器和局域互联网 (LIN) 收发器供电,提供了最小的系统解决方案占位。提供了 SPI 接口进行参数设置和系统运行状况监控。LV8907 工作结温容限可达 175°C,具有可电子兼容 LIN 的控制信号(PWM 和 Enable),是理想的独立汽车 BLDC 电机控制系统解决方案。 | 立即购买 |
| 标题 | 类型 | 大小(KB) | 下载 |
|---|---|---|---|
| A minimum size, standalone motor application using the LV8907UW | 693 | 点击下载 | |
| 汽车自动空调(HVAC)风机演示采用一个功率集成模块(PIM)及一个三相无刷直流(BLDC)电机驱动器 | UNKNOW | 135 | 点击下载 |
| 高能效无刷电机(BLDC)方案提供同类最佳的热性能 介绍新的STK984-190-E功率集成模块 | UNKNOW | 135 | 点击下载 |
| 物联网开发套件简介 | UNKNOW | 136 | 点击下载 |
| 物联网开发套件智能电机演示安装 | UNKNOW | 136 | 点击下载 |
| 物联网开发套件设置培训教材 | UNKNOW | 136 | 点击下载 |
| Case 131AN : SPQFP48 7x7 / SQFP48K / Marking / Pin Assignment | UNKNOW | 30 | 点击下载 |
| 物联网(IoT)系统和方案一览 (第一部份) | UNKNOW | 136 | 点击下载 |
MS1023与MS1224是瑞盟公司基于BLVDS SerDes技术推出的并串/串并转换器,MS1023能够Pin to Pin替代DS90LV1023E、SN65LV1023A,MS1224
低压单/双路比较器-AiP331LV/AiP393LV
Diodes 公司 (Nasdaq:DIOD) 宣布推出 BCR430UW6 线性 LED 驱动器,具备超低压降且恒定电流调节介于 5mA 至 100mA 间。这项结合可使低供应电压驱动更多 LED,让 BCR430UW6 得以适用于需要并用多个 LED 的产品应用,例如适用于商业和零售...
Texas Instruments SN74LV74A/SN74LV74A-Q1双通道D型触发器是正沿触发D型触发器,设计采用2V至5.5V V~CC~ 运行。这些器件在规格上完全适合使用I~off
LV8907是一款通过AEC-Q100认证的高性能、无传感器三相BLDC马达控制器,集成了用于驱动外部N-MOSFET的栅极驱动器。片上双极电荷泵为各种低RDS(ON)型外部N-MOSFET提供了所需的栅极电压。该器件提供了丰富的系统保护与诊断功能,例如...
...美半导体创新的、集成的无传感器3相BLDC电机控制方案LV8907UW用于汽车。LV8907UW是独立的方案,并提供一系列丰富的系统保护和诊断功能如过流、过压、短路、欠压、过温等等。LV8907UW使无刷电机如有刷电机一样易于使用,无需任...
...以前的机械式应用的电子化是关键一步,如泵和风扇。LV8907UW由于高集成度和支持无传感器运行,使电机系统无需微控制器就能达到最高能效水平。由此产生的设计减少复杂度和物料单,并增强可靠性。”
| LF444-DIE | LM2575 | LAN9420 | LMP7721 |
| LMZ34202 | LMH6639-MIL | LMG5200 | LC87F2L08A |
| LM324S | LIS2HH12 | LM20 | LV52207AXA |
| LA6585FA | LC898301XA | L6563 | LMK04610 |
| LM2902 | LC75857W | LMC6001-MIL | LV8012T |