首页产品索引RN1810

    RN1810

    购买收藏
    IEEE 802.11b/g/n WiFly Module with onboard TCP/IP stack

     

    产品信息

    The RN1810 is an ultra-low power, 2.4 GHz IEEE 802.11b/g/n surface mount module.  This small form factor module is a complete Wi-Fi solution with on-board TCP/IP networking stack, integrated PCB trace antenna, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier.  The RN1810 is fully-certified, freeing the designer from RF and antenna design regulatory compliance testing, which provides faster time to market.  The RN1810 is configured with a simple ASCII command language which speeds up prototyping and shortens development time.  In the simplest configuration, the module requires only power, ground and UART TX and RX connections.

    With the RN1810, designers can embed Wi-Fi and networking functionality rapidly into virtually any device.  The RN1810 provides cost and time-to-market savings as a self-contained Internet-enabling solution.  The module has been designed to provide designers with a simple Wi-Fi solution that features:

    • Ease of integration and programming
    • Vastly reduced development time
    • Minimum system cost
    • Long battery life
    • Maximum value in a range of applications

    The RN1810 has an integrated PCB trace antenna (Part Number RN1810-I/RM100) and the RN1810E has an ultra-small W.FL connector for external antennas (Part Number RN1810E-I/RM100)

    For the latest firmware details and corresponding part numbers, please visit:

      Low Power IEEE 802.11b/g/n Wi-Fi module

      UART Interface to Host Controller

      Configured using simple ASCII commands

      Integrates easily into final product - Minimizes product development & provides quick time to Market

      Fully integrated wireless module with voltage regulation, crystal, RF matching circuitry, Power Amplifier (PA), Low Noise Amplifier (LNA), and PCB Trace Antenna

      Ultra-small W.FL connector for external antennas (RN1810E)

      Compact surface mount module: 0.700" x 1.050" x 0.085" (17.8 mm x 26.7 mm x 2.2 mm)

      Castellated Surface Mount Pads for easy and reliable PCB mounting

      Environmentally Friendly, RoHS Compliant

      FCC, IC, European R&TTE, Australia/New Zealand, Korea, Taiwan & Japan Certified

    电路图、引脚图和封装图

    在线购买

    型号制造商描述购买
    RN1810-I/RM110Samtec2MM TERMINAL STRIP 立即购买
    RN1810E-I/RM110SiTimeOSC PROG LVCMOS 3V 20PPM SMD 立即购买
    RN1810-I/RM100Susumu66.5 Ohms ±0.05% 0.125W,1/8W 芯片电阻 0805(2012 公制) 耐硫,汽车级 AEC-Q200 汽车认证 薄膜 立即购买
    RN1810E-I/RM100Vishay158 kOhms ±1% 0.75W,3/4W 芯片电阻 2010(5025 公制) 汽车级AEC-Q200 厚膜 立即购买

    应用案例更多案例

    系列产品索引查看所有产品

    RHYTHM R3110RE46C163REF03RN4677
    RE46C800RE46C109RHYTHM R3910rclamp0524p
    RE46C101RV4141ARE46C152REF02
    REF191RE46C190RE46C100RE46C144
    REF196RN240RE46C129RHYTHM SB3231
    Copyright ©2012-2024 hqchip.com.All Rights Reserved 粤ICP备14022951号工商网监认证 工商网监 营业执照