LC75839PW

购买收藏

LCD Driver, 1/4 and 1/3 Duty, General-Purpose

制造商：ON

中文数据手册

产品信息

The LC75839PW is 1/4 duty and 1/3 duty general-purpose microprocessor-controlled LCD driver that can be used in applications such as frequency display in products with electronic tuning. In addition to being able to drive up to 208 segments directly, the LC75839PW can also control up to 4 general-purpose output ports. Because it has the PWM output of a maximum of 3 ch, the brightness control of the LED backlight of RGB can be done. Incorporation of an oscillation circuit helps to reduce the number of external resistors and capacitors required.

Support for 1/4-duty 1/3-bias or 1/3-duty 1/3-bias drive techniques under serial data control.
When 1/4-duty: Capable of driving up to 208 segments
When 1/3-duty: Capable of driving up to 159 segments
Serial data input supports 'computer control bus' format communication with the system controller.
(Support 3.3 V and 5 V operation)
Serial data control of the power-saving mode based backup function and the all segments forced off function.
Serial data control of switching between the segment output port and general-purpose output port function.
(Support for up to 4 general-purpose output ports)
Support for the PWM output function of a maximum of 3 ch.
(It can output from the general-purpose output port )
Support for clock output function of 1ch.
Serial data control of the frame frequency of the common and segment output waveforms.
Serial data control of switching between the internal oscillator operating mode and external clock operating mode.
High generality, since display data is displayed directly without the intervention of a decoder circuit.
The INH pin allows the display to be forced to the off state.
Incorporation of an oscillator circuit.
(Incorporation of resistor and capacitor for an oscillation)

在线购买

型号	制造商	描述	购买
LC75839PWS-H	ON	ICLCDDISPLAYDRIVER	立即购买
LC75839PW-H	ON	IC LCD DISPLAY DRIVER 64SQFP	立即购买
LC75839PWH-H	-	-	立即购买

技术资料

标题	类型	大小（KB）	下载
SPQFP64 10x10 / SQFP64	PDF	63	点击下载
1/4 and 1/3-Duty General-Purpose LCD Driver	PDF	264	点击下载

应用案例更多案例

LC谐振电路应用方法
根据电路中电感器L和电容器C的连接方式不同，共有两种基本的LC谐振电路：LC并联谐振电路和LC串联谐振电路。
2023-02-13
LC电路是如何产生振荡的？
LC电路是一种常用的振荡电路，它能够产生稳定的振荡信号。LC电路由电感（L）和电容（C）组成，通过它们之间的相互作用，可以实现振荡现象。
2023-07-31
为什么LC振荡器中LC回路一般都工作在失谐状态？
为什么LC振荡器中LC回路一般都工作在失谐状态？它对振荡频率稳定度有什么影响？ LC振荡器是一种基本的振荡器电路，由一个电容和一个电感器构成的电路。其中，电容和电感器的并联组成的LC回路是LC振荡器
2023-10-20
LC振荡电路原理详解
给大家分享一下关于LC振荡电路。LC振荡器的类型有很多，例如：哈特利振荡器、Colpitts 振荡器、克拉普振荡器等
2022-11-10
模拟电源处的滤波经常是用LC电路，但是为什么有时LC比RC滤波效果差？
模拟电源处的滤波经常是用LC电路。但是为什么有时LC比RC滤波效果差？ LC滤波电路和RC滤波电路是常见的电源滤波电路，它们的基本原理是利用电感和电容器等元件组成的回路对电源产生的干扰信号进行滤波
2023-11-24
数据中心为什么离不开LC-LC光纤跳线的加持
近些年来，数据中心对网络传输系统的带宽要求不断增加，从而也使得了光纤跳线的性能不断加强，根据不同的需求，类型也不断的增多，如：LC超低插损单模光纤跳线、LC超低插损多模光纤跳线、LC一管双芯光纤跳线
2022-12-29
LC振荡电路原理详解
LC振荡电路原理详解
2022-12-15
PW4053锂电池充电管理芯片的介绍
PW4053，USB C口5V输入,三节串联锂电池充电IC，12.6V1A充电板
2022-06-23

系列产品索引查看所有产品

LB1845	LV8111VB	LB1838M	LM2773
LM339	LM7918	LSM303D	LF444-DIE
LM311-N	LV52207XA	LE25U40CQE	LE25S40MB
LSM6DS3	LC898123AXD	LC898300XA	LMK00334
LM258	LB11852RV	LC75879PT	LM723QML

元器件商品{{ gnNumber + hkNumber }}