LC75879PT

购买收藏

LCD Driver, 1/4, 1/3 Duty, General-Purpose

制造商：ON

中文数据手册

产品信息

The LC75879PT is the 1/4 duty and 1/3 duty general-purpose microprocessor-controlled LCD driver that can be used in applications such as frequency display in products with electronic tuning.In addition to being able to drive up to 272 segments directly, the LC75879PT can also control up to 8 general-purpose output ports. Because it has the PWM output of a maximum of 3 ch, the brightness control of the LED backlight of RGB can be done. Incorporation of an oscillation circuit helps to reduce the number of external resistors and capacitors required.

Support for 1/4-duty 1/3-bias or 1/3-duty 1/3-bias drive techniques under serial data control.
Serial data input supports 'computer control bus' format communication with the system controller (Support 3.3 V and 5 V operation).
Serial data control of the power-saving mode based backup function and the all segments forced off function.
Serial data control of switching between the segment output port and general-purpose output portfunction. (Support for up to 8 general-purpose output ports)
Support for the PWM output function of a maximum of 3ch (It can output from the general-purpose output port).
Support for clock output function of 1ch (It can output from the general-purpose output port).
Serial data control of the frame frequency of the common and segment output waveforms.
Serial data control of switching between the internal oscillator operating mode and external clock operating mode.
High generality, since display data is displayed directly without the intervention of a decoder circuit.
Built-in display contrast adjustment circuit.
The INH pin allows the display to be forced to the off state.
Incorporation of an oscillator circuit (Incorporation of resistor and capacitor for an oscillation).

在线购买

型号	制造商	描述	购买
LC75879PTS-H	ON	ICLCDDISPLAYDRIVER	立即购买
LC75879PT-H	ON	IC LCD DISPLAY DRIVER 80TQFP	立即购买
LC75879PTH-H	-	-	立即购买

技术资料

标题	类型	大小（KB）	下载
TQFP80 12x12 / TQFP80J	PDF	62	点击下载
1/4, 1/3-Duty General-Purpose LCD Driver	PDF	353	点击下载

应用案例更多案例

为什么LC振荡器中LC回路一般都工作在失谐状态？
为什么LC振荡器中LC回路一般都工作在失谐状态？它对振荡频率稳定度有什么影响？ LC振荡器是一种基本的振荡器电路，由一个电容和一个电感器构成的电路。其中，电容和电感器的并联组成的LC回路是LC振荡器
2023-10-20
PT断线是什么 PT断线故障的处理方法
PT是电压互感器的英文符号，电压互感器断线，在电力电气生产活动中是一种比较常见的故障。一旦PT断线失压，对保护、计量、测量等操作的准确性和可靠性，均会产生至关重要的影响。主要表现在以下几个方面：
2022-11-14
Pt SACs/CrN实现高效HOR
所制备的Pt SACs/CrN具有高活性和稳定性，并且在极低的Pt负载下具有优异的CO耐受性。
2022-11-08
HD300A电容电流测试仪电力系统中PT连接方式及PT变比测量方法
电力系统中PT连接方式及PT变比电力系统中的PT连接方式和PT的变比会对测试仪的测量结果产生很大的影响，如果PT的连接方式和变比选择不正确，测量结果将不是系统的真实电容电流值。因此为了测得正确的数据
2022-05-10
LC并联谐振电路和LC串联谐振电路
根据电路中电感器L和电容器C的连接方式不同，共有两种基本的LC谐振电路：LC并联谐振电路和LC串联谐振电路。在放大器电路和其它形式的信号处理电路中，大量使用LC并联谐振电路和LC串联谐振电路。下图
2020-10-20
数据中心为什么离不开LC-LC光纤跳线的加持
近些年来，数据中心对网络传输系统的带宽要求不断增加，从而也使得了光纤跳线的性能不断加强，根据不同的需求，类型也不断的增多，如：LC超低插损单模光纤跳线、LC超低插损多模光纤跳线、LC一管双芯光纤跳线
2022-12-29
LC接口光模块的简单介绍
网线传输外，其余的光模块大体接口分为LC、SC、MPO三大类，今天我们就来讲讲有关LC接口光模块的相关知识。 LC接口的光模块使用最为频繁，搭配LC跳线连接使用，跳线分为LC单工和LC双工，LC单工跳线连接单纤模块，LC双工连接双纤模块。在百
2021-09-08
PT2262/PT2272管脚说明和引脚图
PT2262/PT2272 是台湾普城公司生产的一种CMOS 工艺制造的低功耗低价位通用编解码电路，PT2262/PT2272 最多可有12 位（A0-A11）三态地址端管脚（悬空，接高电平，接
2017-11-14

系列产品索引查看所有产品

l7805cv	LB1862MC	LMH6622	LB11696V
LC75843UGA	LM3209	LMK00301	LC898217XH
LM337	LC709511F	L297	LND250
LB11873	LIS2DH	LF412-N	LC75055PE
LV5237JA	LM3281	LUPA1300-2	LC75829PW

元器件商品{{ gnNumber + hkNumber }}