购物车0
Ideal for low power (<100nA standby current) and connectivity applications that benefit from the availability of multiple serial ports (3xI2C, 3xSPI), 4xUARTS, and 23 independent timers. Large amounts of RAM (16kB) memory for buffering and large (up to 256kB) Enhanced Flash program memory make it ideal for embedded control and monitoring applications. PPS (Peripheral Pin Select) aids in configuring the most efficient pin configuration of available I/O, and CTMU provides touch sensing support for up to 64 individual buttons.Available in 64, 80, and 100 pin packages
CPUUp to 16 MIPS performance
16 x 16 Hardware Multiply, Single Cycle Execution
12-bit x 16-bit Hardware Divider
C Compiler Optimized Instruction Set
nanoWatt Power Managed ModesRun, Idle and Sleep modes Multiple, Switchable Clock Modes for Optimum Performance and Power Management
Run mode: 1 mA/MIPS, 2.0V Typical
Sleep mode Current Down to 100 nA Typical
Standby Current with 32 kHz Oscillator: 2.5 uA, 2.0V typical
Flash Program MemorySelf-Reprogrammable under Software Control
10,000 erase/write cycles
20 year data retention
EEPROM emulation capable
SystemInternal oscillator support - 31 kHz to 8 MHz, up to 32 MHz with 4X PLL
On-chip LDO Voltage Regulator
JTAG Boundary Scan and Flash Memory Program Support
Fail-Safe Clock Monitor – allows safe shutdown if clock fails
Watchdog Timer with separate RC oscillator
Analog Features10-bit ADC, 16 channels, 500k samples per second
Three Analog comparators
PeripheralsCTMU supports Capacitive Touch applications
Peripheral Pin Select allows I/O remapping of many peripherals in real time
4xUART Modules with LIN and IrDA support, 4 Deep FIFO
3xSPI ™ Modules with 8 Deep FIFO
3xI2C™ Modules with Master and Slave Modes
Five 16-bit Timer Modules
Up to 9 Input Capture and 9 Output Compare/PWM with dedicated time base
Hardware RTCC, Real-Time Clock Calendar with Alarms
PMP, Parallel Master Port, with 16 Address Lines, and 8/16-bit Data

PIC24FJ128GA110 封装图
| 型号 | 制造商 | 描述 | 购买 |
|---|---|---|---|
| PIC24FJ128GA110-E/PF | SiTime | 有源晶振 ±35ppm 2.5V 148.35MHz SMD3225_6P | 立即购买 |
| PIC24FJ128GA110-E/PT | ATS | Installation and Removal Tool For Heat Sink Attachment Assemblies 19mm x 19mm | 立即购买 |
| PIC24FJ128GA110-I/PF | PUI Audio | 8 Ohm Magnetic Speaker 500mW 900Hz ~ 20kHz Top Oval, Rectangular Frame 82dB | 立即购买 |
| PIC24FJ128GA110-I/PT | Honeywell | HERMETIC THERMOSTAT | 立即购买 |
...,并且这些应用程序未经过全面测试以满足这些批准。 PIC24FJ128GC010 系列将高速 16 位 PIC24 MCU 与模拟外设相结合。除了 USB 和液晶显示器 (LCD) 控制器等数字模块外,PIC24FJ128GC010 还具有一个 12 位 10 Msps 流水线 ADC、一个 16 位 Sigma-De...
的 dsPIC33FJ32GP302/304、dsPIC33FJ64GPX02/X04 和 dsPIC33FJ128GPX02/X04 这几款 16 位数字信号控制器。 文件下载: DSPIC33FJ128
微控制器,它具有USB On - The - Go(OTG)功能,适用于64/100引脚的应用场景。 文件下载: PIC24FJ128GB206T-I/MR.pdf 一、产品概述与代码保护
和卓越的性能,成为众多工程师的首选。本文将深入剖析该系列微控制器的各项特性,为电子工程师们提供全面的参考。 文件下载: PIC24FJ128DA206T-I/MR.pdf 一、产品概述
PIC24FJ64GA004 系列 16 位闪存微控制器:高性能与多功能的完美结合 在电子设计领域,选择合适的微控制器对于项目的成功至关重要。PIC24FJ64GA004 系列 16 位闪存微控制器
PIC24FJ128GA010 系列 16 位闪存微控制器:高性能与多功能的完美结合 在电子设计领域,选择一款合适的微控制器至关重要。今天,我们来深入了解 Microchip 推出
PIC24FJ64GB004系列微控制器:功能强大的16位解决方案 在电子工程师的日常设计工作中,选择一款合适的微控制器至关重要。Microchip的PIC24FJ64GB004系列微控制器为我们
探索PIC24FJ16MC101/102和PIC24FJ32MC101/102/104 16位微控制器的卓越性能 在电子工程师的工具箱中,微控制器无疑是核心工具之一。今天,我们将深入探讨