The MIC2298 is a high power boost-switching regulator that is optimized for constant-current control. The MIC2298 is capable of driving up to two series 1A white LED for photoflash, flashlight and other applications. The feedback voltage is only 200mV, minimizing ballast power dissipa-tion in constant-current control applications for improved operating efficiency.

The MIC2298 has a brightness pin that allows for a programmable torch mode as well full flash with a single pin when driving high current LEDs.

The MIC2298 implements a constant frequency 1MHz PWM control scheme to make the smallest possible design.

The 2.5V to 10V input voltage range of MIC2298 allows direct operation from 1- and 2-cell Li-Ion as well as 3- to 6-cell NiCad/NiMH/Alkaline battery sources. Maximum battery life is assured with a low 1µA shutdown current.

The MIC2298 is available in a low profile 12-pin 3mm x 3mm MLF® package.

  3.5A minimum switch current delivers at least 7W of output power over temperature

  200mV ±10% feedback voltage

  2.5V to 10V input voltage

  Output voltage up to 30V (max)

  12-pin 3mm x 3mm leadless MLF® package

  Output over voltage protection (OVP)

  1MHz operation

  Programmable output current

  <1% line regulation

  1µA shutdown current

  Over-temperature protection

  Externally programmable soft-start

  Under voltage lockout (UVLO)

  -40°C to +125°C junction temperature range