MD1711 is an IC for a two-channel, 5-level, high voltage and high speed transmitter driver. It is designed for medical ultrasound imaging applications, but can also be used for metal flaw detection, Non-Destructive Testing (NDT), and for driving piezoelectric transducers.The MD1711 is a two-channel logic controller circuit with low impedance MOSFET gate drivers. There are two sets of control logic inputs, one for channel A and one for channel B.Each channel consists of three pairs of MOSFET gate drivers.These drivers are designed to match the drive requirements ofTC6320. The MD1711 drives six TC6320s. Each pair consists of an N-channel and a P-channel MOSFET. They are designed to have the same impedance and can provide peak currents of over 2.0amps.

  Drives two ultrasound transducer channels

  Generates 5-level waveform

  Drives 12 high voltage MOSFETs

  ±2.0A source and sink peak current

  Up to 20MHz output frequency

  12V/ns slew rate

  ±3ns matched delay times

  Second harmonic is less than -40dB

  Two separate gate drive voltages

  1.8 to 3.3V CMOS logic interface