购物车0制造商:Microchip
The MCP3914 is a 3V eight-channel Analog Front End(AFE, containing eight synchronous sampling delta-sigma ADCs, eight PGAs, phase delay compensation block, low-drift internal voltage reference, digital offset and gain errorcalibration registers, and high-speed 20 MHz SPI compatible serial interface.The MCP3914 ADCs are fully configurable, with features such as: 16/24-bit resolution, Oversampling Ratio (OSR) from 32 to 4096, gain from 1x to 32x, independent Shutdown and Reset, dithering and auto-zeroing.The MCP3914 includes advanced security features to secure the communications and the configuration settings, such as a CRC-16 checksum on both serial data outputs and static register map configuration. It also includes a register-map lock through an 8-bit secure key to stop unwanted write commands from processing.The MCP3914 is capable of interfacing with a variety of voltage and current sensors, including shunts, current transformers, Rogowski coils and Hall-effect sensors.
Eight Synchronous Sampling 24-bit Delta-Sigma ADCs
94.5 dB SINAD, -107 dBc Total Harmonic Distortion (THD) (up to 35th Harmonic), 112 dBFS SFDR for Each Channel
Enables 0.1% Typical Active Power Measurement Error over a 10,000:1 Dynamic Range
Advanced Security Features:- 16-bit Cyclic Redundancy Check (CRC) checksum- 16-bit CRC checksum and interrupt alert for register map configuration- Register map lock with 8-bit secure key
Programmable Data Rate up to 125 ksps
Oversampling Ratio up to 4096
Ultra-Low Power Shutdown Mode with < 10 µA
-122 dB Crosstalk between Channels
Differential Voltage Reference Input Pins
High Gain Programmable-Gain Amplifier (PGA) on Each Channel (up to 32 V/V)
Phase Delay Compensation with 1 µs Time Resolution
Separate Data Ready Pin for Easy Synchronization
Individual 24-bit Digital Offset and Gain Error Correction for Each Channel
High-Speed 20 MHz Serial Peripheral Interface (SPI) with Mode 0,0 and 1,1 Compatibility
Continuous Read/Write Modes for Minimum Communication Time
Available in a 40-lead UQFN Package

MCP3914 封装图
| 型号 | 制造商 | 描述 | 购买 |
|---|---|---|---|
| MCP3914A1T-E/MV | Microchip | 立即购买 | |
| MCP3914A1-E/MV | Microchip | MCP3914 是一个 3V 八通道模拟前端,包含八个同步采样 Δ-Σ 模数转换器 (ADC),八个可编程增益放大器 (PGA),低漂移内部电压参考,数字偏移和增益误差校准寄存器,高速 20 MHz SPI 接口。 | 立即购买 |
一、MCP是什么? 为什么需要它? 想象一下,你正在开发一个 AI 编程助手,它需要: 读取和修改项目文件 查询数据库Schema 搜索代码仓库 执行Git操作 传统做法是为每个数据源写一套专用代码
相较于内含MCU的混合式半数位电源控制的LEDDriver,MCP1633在价格上相对低廉许多,而使用上也和DEPA系列的MCP19xxxLowsideMOSFETdriver也非常类似,可以
MCP1790/MCP1791:高性能高电压稳压器的详细解析 在电子设计领域,稳压器是不可或缺的关键组件,它能为各种电子设备提供稳定的电源。MCP1790/MCP1791作为一款高性能的高电压稳压器
相较于内含MCU的混合式半数位电源控制的LEDDriver,MCP1633在价格上相对低廉许多,而使用上也和DEPA系列的MCP19xxxLowsideMOSFETdriver也非常类似,可以
MCP1790/MCP1791:高电压稳压器的卓越之选 在电子设计领域,稳压器是不可或缺的重要组件。今天,我们来深入探讨 Microchip 公司推出的 MCP1790/MCP1791 70 mA
MCP1630/MCP1630V高速脉宽调制器:设计与应用解析 一、引言 在电子设计领域,高效、智能的电源管理至关重要。MCP1630/MCP1630V作为一款高性能的高速脉宽调制器(PWM),为
相较于内含MCU的混合式半数位电源控制的LEDDriver,MCP1633在价格上相对低廉许多,而使用上也和DEPA系列的MCP19xxxLowsideMOSFETdriver也非常类似,可以
相较于内含MCU的混合式半数位电源控制的LEDDriver,MCP1633在价格上相对低廉许多,而使用上也和DEPA系列的MCP19xxxLowsideMOSFETdriver也非常类似,可以