The LC75897PW is 1/3 duty and 1/4 duty general-purpose LCD display driver that can be used for frequency display in electronic tuners under the control of a microcontroller. The LC75897PW can drive an LCD with up to 512 segments directly. The LC75897PW can also control up to 8 general-purpose output ports. The LC75897PW has a built-in of up to three PWM output port channels, which enables to adjust the brightness of the RGB LED backlight.
-
Switching between 1/3 duty and 1/4 duty drive techniques under serial data control.
-
Switching between 1/2 bias and 1/3 bias drive techniques under serial data control.
-
Up to 387 segments for 1/3 duty drive and 512 segments for 1/4 duty drive can be displayed.
-
Switching between the segment, general-purpose, PWM, and clock output ports can be controlled using serial data
- (up to 8 general-purpose output ports, up to 3-channel PWM output ports, and one clock output port).
-
Serial data input supports 'computer control bus' format communication with the system controller.
-
Serial data control of the power-saving mode based backup function and all the segments forced off function.
-
Serial data control of the frame frequency for common and segment output waveforms.
-
Serial data control of switching between the RC oscillator operating mode and external clock operating mode.
-
High generality, since display data is displayed directly without decoder intervention.
-
Built-in display contrast adjustment circuit
-
Independent VLCD for the LCD driver block
-
The INH pin can force the display to the off state.
-
RC oscillator circuit