LC75809PT

购买收藏

Microprocessor-controlled LCD Driver, 1/4 Duty and 1/3 Duty, General-purpose

制造商：ON

中文数据手册

产品信息

The LC75809PT is the 1/4 duty and 1/3 duty general-purpose microprocessor-controlled LCD driver that can be used in applications such as frequency display in products with electronic tuning. In addition to being able to drive up to 352 segments directly, the LC75809PT can also control up to 12 general-purpose output ports. Because it has the PWM output of a maximum of 6ch, the brightness control of the LED backlight of RGB x 2 can be done. Incorporation of an oscillation circuit helps to reduce the number of external resistors and capacitors required.

Support for 1/4-duty 1/3-bias or 1/3-duty 1/3-bias drive techniques under serial data control.
When 1/4-duty : Capable of driving up to 352 segments
When 1/3-duty : Capable of driving up to 267 segments
Serial data input supports 'computer control bus' format communication with the system controller. (Support 3.3 V and 5 V operation)
Serial data control of the power-saving mode based backup function and the all segments forced off function.
Serial data control of switching between the segment output port and general-purpose output port function.
(Support for up to 12 general-purpose output ports)
Support for the PWM output function of a maximum of 6ch. (It can output from the general-purpose output port).
Support for clock output function of 1ch. (It can output from the general-purpose output port).
Serial data control of the frame frequency of the common and segment output waveforms.
Serial data control of switching between the internal oscillator operating mode and external clock operating mode.
High generality, since display data is displayed directly without the intervention of a decoder circuit.
Built-in display contrast adjustment circuit.
The INH pin allows the display to be forced to the off state.
Incorporation of an oscillator circuit. (Incorporation of resistor and capacitor for an oscillation)

在线购买

型号	制造商	描述	购买
LC75809PTS-H	ON	IC LCD DISPLAY DRIVER	立即购买
LC75809PT-H	ON	IC LCD DISPLAY DRIVER	立即购买
LC75809PTH-H	-	-	立即购买

技术资料

标题	类型	大小（KB）	下载
TQFP100 14x14 / TQFP100	PDF	64	点击下载
1/4 and 1/3-Duty General-Purpose LCD Driver	PDF	335	点击下载

应用案例更多案例

Pt SACs/CrN实现高效HOR
所制备的Pt SACs/CrN具有高活性和稳定性，并且在极低的Pt负载下具有优异的CO耐受性。
2022-11-08
PT断线是什么？为什么说PT断线影响很严重？
PT断线是什么？为什么说PT断线影响很严重？ PT断线是指电压互感器的一种故障状态，即PT缺乏或中断了电压信号的传输。PT作为一种重要的电气元件，主要用于将高压系统的电压降到安全范围内，以供电力仪表
2023-12-27
为什么LC振荡器中LC回路一般都工作在失谐状态？
为什么LC振荡器中LC回路一般都工作在失谐状态？它对振荡频率稳定度有什么影响？ LC振荡器是一种基本的振荡器电路，由一个电容和一个电感器构成的电路。其中，电容和电感器的并联组成的LC回路是LC振荡器
2023-10-20
LC选频放大器与LC正弦波发生器讲解
　收音机的选台功能，就是选出特定频率的波形，进行放大。将LC并联网络作为共射极放大电路的集电极负载，可以形成LC谐振选频放大器。根据LC并联网络的频率特性，在输入信号的频率为谐振频率时，由于LC并联
2023-04-26
什么是PT断线 PT断线的影响
我们首先了解PT断线是什么。PT是电压互感器的英文符号，电压互感器断线，在电力电气生产活动中是一种比较常见的故障。一旦PT断线失压，对保护、计量、测量等操作的准确性和可靠性，均会产生至关重要
2023-11-25
LC谐振电路应用方法
根据电路中电感器L和电容器C的连接方式不同，共有两种基本的LC谐振电路：LC并联谐振电路和LC串联谐振电路。
2023-02-13
PT断线是什么 PT断线故障的处理方法
PT是电压互感器的英文符号，电压互感器断线，在电力电气生产活动中是一种比较常见的故障。一旦PT断线失压，对保护、计量、测量等操作的准确性和可靠性，均会产生至关重要的影响。主要表现在以下几个方面：
2022-11-14
HD300A电容电流测试仪电力系统中PT连接方式及PT变比测量方法
电力系统中PT连接方式及PT变比电力系统中的PT连接方式和PT的变比会对测试仪的测量结果产生很大的影响，如果PT的连接方式和变比选择不正确，测量结果将不是系统的真实电容电流值。因此为了测得正确的数据
2022-05-10

系列产品索引查看所有产品

LM150QML	LC898119XC	LC87F2R04A	LC786965UW
LM334	lm1875	LSM6DS3	LMH7322
LC75879PT	LC88FC2F0B	LC75700T	LT1009M
LM2588	LB1936V	LC05132C01NMT	LM350A
LP2953QML	LM614-MIL	LM317L	LM1875

元器件商品{{ gnNumber + hkNumber }}