联系客服

元器件业务:

0731-85350837

0731-85351037

PCB/SMT/PCBA业务:

0755-83688678

在线客服

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

购物车0

元器件商品0

国内交货0香港交货0
型号 品牌 单价 数量 小计 操作
华秋自营
合作库存 ( 订单含第三方合作库存商品,下单前请与客户经理确认价格和交期 )
海外代购 ( 订单含海外代购商品,下单前请与客户经理确认价格和交期 )
  • 已选中0个商品 总价(不含运费): ¥0
    商品原价:¥0 活动优惠:-¥0.00
  • 去结算
型号 品牌 单价 数量 小计 操作
  • 已选0个型号
  • 合计(不含运费):$ 0
  • 去结算
购物车中还没有商品,赶紧选购吧
首页产品索引LAN9220

LAN9220

购买收藏
10Base-T/100Base-TX Ethernet Controller with 16 bit interface

 

产品信息

The LAN9220 is a full-featured, single-chip 10/100 Ethernet controller designed for embedded applications where performance, flexibility, ease of integration and system cost control are required. The LAN9220 is fully IEEE 802.3 10BASE-T and 802.3u 100BASE-TX compliant, and supports HP Auto-MDIX. The variable voltage I/O signals of the LAN9220 accommodate lower voltage I/O signalling without the need for voltage level shifters.

The LAN9220 includes an integrated Ethernet MAC and PHY with a high-performance SRAM-like slave interface. The simple, yet highly functional host bus interface provides a glue-less connection to most common 16-bit microprocessors and microcontrollers as well as 32-bit microprocessors with a 16-bit external bus. The integrated checksum offload engines enable the automatic generation of the 16-bit checksum for received and transmitted Ethernet frames, offloading the task from the CPU. The LAN9220 also includes large transmit and receive data FIFOs to accommodate high latency applications. In addition, the LAN9220 memory buffer architecture allows highly efficient use of memory resources by optimizing packet granularity.

The EEPROM device from Microchip comes with a factory programmed, globally unique EUI-48™ MAC Address. This Ethernet controller will automatically detect and load the EUI-48™ node address from the  EEPROM at start-up or reset.


*Theservice is subject to Microchip'sand requires a myMicrochip account.

Highlights

  Efficient architecture with low CPU overhead

  Easily interfaces to most 16-bit embedded CPU's

  1.8V to 3.3V variable voltage I/O accommodates wide range of I/O signaling without voltage level shifters

  Integrated PHY with HP Auto-MDIX support

  Integrated checksum offload engine helps reduce CPU load

  Low pin count and small body size package for small form factor system designs

Target Applications

  Cable, satellite, and IP set-top boxes

  Digital video recorders

  Video-over IP solutions, IP PBX & video phones

  Wireless routers & access points

  Audio distribution systems

  Printers, kiosks, security systems

  General embedded applications

Key Benefits

  Non-PCI Ethernet controller for standard performance applications

  16-bit interface

  Burst-mode read support

  Minimizes dropped packets

  Internal buffer memory can store over 200 packets

  Automatic PAUSE and back-pressure flow control

  Minimizes CPU overhead

  Supports Slave-DMA

  Interrupt Pin with Programmable Hold-off timer

  Reduces system cost and increases design flexibility

  SRAM-like interface easily interfaces to most embedded CPU's or SoC's

  Reduced-Power Modes

  Numerous power management modes

  Wake on LAN

  Magic packet wakeup

  Wakeup indicator event signal

  Link Status Change

  Single chip Ethernet controller

  Fully compliant with IEEE 802.3/802.3u standards

  Integrated Ethernet MAC and PHY

  10BASE-T and 100BASE-TX support

  Full- and Half-duplex support

  Full-duplex flow control

  Backpressure for half-duplex flow control

  Preamble generation and removal

  Automatic 32-bit CRC generation and checking

  Automatic payload padding and pad removal

  Loop-back modes

  Flexible address filtering modes

  One 48-bit perfect address

  64 hash-filtered multicast addresses

  Pass all multicast

  Promiscuous mode

  Inverse filtering

  Pass all incoming with status report

  Disable reception of broadcast packets

  Integrated 10/100 Ethernet PHY

  Supports HP Auto-MDIX

  Auto-negotiation

  Supports energy-detect power down

  Host bus interface

  Simple, SRAM-like interface

  16-bit data bus

  16Kbyte FIFO with flexible TX/RX allocation

  One configurable host interrupt

  Miscellaneous features

  Small form factor, 56-pin QFN RoHS Compliant package

  Integrated 1.8V regulator

  Integrated checksum offload engine

  Mixed endian support

  General Purpose Timer

  Optional EEPROM interface

  Support for 3 status LEDs multiplexed with Programmable GPIO signals

  Single 3.3V Power Supply with Variable Voltage I/O

  0° to 70°C Commercial Temperature Support

电路图、引脚图和封装图

在线购买

型号制造商描述购买
LAN9220-ABZJONPYTHON 2000 是一款 2/3" 2.3 CMOS 图像传感器,像素阵列为 1920 X 1200。 高灵敏度的 4.8 ?m x 4.8 ?m 像素支持低噪点“管线”和“触发”全局快门读取模式。另外,全局快门模式下的关联双采样 (CDS) 支持可降低噪点,提高动态范围。 该传感器具有片上可编程增益放大器和 10 位 A/D 转换器。集成时间和增益参数可以重新配置,而不会出现任何可见的图像瑕疵。可选的片上自动曝光控制环路 (AEC) 动态控制这些参数。图像的黑度等级可自动校准或通过增加用户可编程的偏移进行调整。 使用四线串行外围接口的较高编程能力让用户能够读取感兴趣的具体区域。最多可编程 8 个区域,实现更高的帧速率。该传感器具有 8 个 LVDS 通道,在零 ROT 模式下实现最高每秒 225 帧的帧速率。每个沟道均以 720 Mbps 运行。提供了一个包含负载信息的单独同步沟道,实现了接收端的图像重构。 PYTHON 2000 采用 84 引脚 LCC 封装,提供带和不带保护胶带的单色、彩色和扩展近红外 NIR 版本。 立即购买

技术资料

标题类型大小(KB)下载
以AD9220为核心的高速模数转换电路在核探测中的应用RAR224 点击下载
夏普SH9220C手机使用说明书RAR8030 点击下载
KS9282B+KA9220C+KA9258D伺服板电路图RAR1230 点击下载
RT9220 datasheet pdfRAR141 点击下载
数模模数转换芯片AD9220(12bit10M)PDF385 点击下载

应用案例更多案例

系列产品索引查看所有产品

LM5060-Q1LM339A_XFCSLM335ALV5232VH
LMH6702-MILLM3648LMV301LM431B
LF412QMLLB11650LM101AQMLLMC6482
LF411-NLB1976l293dLB11946
LM2903LC79451KBl3g4200dL6228PDTR
Copyright ©2012-2025 hqchip.com.All Rights Reserved 粤ICP备14022951号工商网监认证 工商网监 营业执照
客服
联系客服

元器件业务:

0731-85350837

0731-85351037

PCB/SMT/PCBA业务:

0755-83688678

在线客服:立即咨询
工作时间

周一至周五(9:00-12:00 13:30-18:30)节假日除外

投诉电话:19925199461

购物车
购物车
询价
询价
足迹
最近浏览记录
没有记录
微商城

微信公众平台

搜索:hqchip001

型号搜索订单查询

投诉
我要投诉