首页产品索引ADS7957

    ADS7957

    购买收藏
    10 位、1MSPS、16 通道、单端、微功耗、串行接口、SAR ADC

    制造商:TI

    中文数据手册

    产品信息

    描述 The ADS79xx is a 12/10/8-bit multichannel analog-to-digital converter family. The following table shows all twelve devices from this product family. The devices include a capacitor based SAR A/D converter with inherent sample and hold. The devices accept a wide analog supply range from 2.7 V to 5.25 V. Very low power consumption makes these devices suitable for battery-powered and isolated power supply applications. A wide 1.7-V to 5.25-V I/O supply range facilitates a glue-less interface with the most commonly used CMOS digital hosts. The serial interface is controlled by CS and SCLK for easy connection with microprocessors and DSP. The input signal is sampled with the falling edge of CS. It uses SCLK for conversion, serial data output, and reading serial data in. The devices allow auto sequencing of preselected channels or manual selection of a channel for the next conversion cycle. There are two software selectable input ranges (0 V to 2.5 V and 0 V to 5 V), four individually configurable GPIOs ( in case of TSSOP package devices), and two programmable alarm thresholds per channel. These features make the devices suitable for most data acquisition applications. The devices offer an attractive power-down feature. This is extremely useful for power saving when the device is operated at lower conversion speeds. The 16/12-channel devices from this family are available in a 38-pin TSSOP and 32 pin VQFN package and the 4/8-channel devices are available in a 30-pin TSSOP and 24 pin VQFN packages.特性1-MHz Sample Rate Serial DevicesProduct Family of 12/10/8-Bit ResolutionZero Latency20-MHz Serial Interface Analog Supply Range: 2.7 to 5.25 V I/O Supply Range: 1.7 to 5.25 VTwo SW Selectable Unipolar, Input Ranges: 0 to 2.5 V and 0 to 5 VAuto and Manual Modes for Channel Selection12, 8, 4-Channel Devices can Share 16 Channel Device Footprint Two Programmable Alarm Levels per ChannelFour Individually Configurable GPIOs for TSSOP package devices. One GPIO for QFN devicesTypical Power Dissipation: 14.5 mW (+VA = 5 V, +VBD = 3V) at 1 MSPSPower-Down Current (1 µA)Input Bandwidth (47 MHz at 3 dB)38-,30-Pin TSSOP and 32-,24-Pin QFN PackagesAPPLICATIONSPLC / IPC Battery Powered SystemsMedical InstrumentationDigital Power SuppliesTouch Screen ControllersHigh-Speed Data Acquisition SystemsHigh-Speed Closed-Loop SystemsAll other trademarks are the property of their respective owners

    应用案例更多案例

    系列产品索引查看所有产品

    AD9461ADR445ADM824AD8137
    AD6679ADG5433AD7918ADSP-SC587
    ADM825AD7686AM26LV32EIPWRADCMP395
    ADUC7061AD5761RAD9750AT89C51ED2-RLTUM
    AD7813AD8353AT86RF212BAD4020
    Copyright ©2012-2024 hqchip.com.All Rights Reserved 粤ICP备14022951号工商网监认证 工商网监 营业执照